Fram Drive™ Oil Filter

Condition: THE oil filer is new missing the UPC code for rebate FRAM DRIVE™ OIL FILTER SKU
FD11473 More Information Height (Inch) 3.330 Outer Diameter Top (Inch) 2.570 Anti-Drain Back Valve No Bypass Relief Valve No Filter Media Material Cellulose/Synthetic Blend Inside Diameter Bottom (Inch) 1.228 O-Ring Inside Diameter (Inch) 2.716 O-Ring Outside Diameter (Inch) 2.874 O-Ring Thickness (Inch) 0.157 O-Rings Included Yes Outer Diameter Bottom (Inch) 2.570 Top Inside Diameter (Inch) 1.228 Torque Nut No Carquest Premium Filters 94715 Champ P1016 Hengst E818HD236 INFINITI 15208-92C09 INFINITI 15208-92C0N INFINITI 15208-HG00D LUBER-FINER P1016 MAHLE OX 982D ECO Mann-Filter HU711/6Z Mercedes-Benz 270 180 0109 Mercedes-Benz 270 184 0025 Mercedes-Benz 270 184 0125 Mercedes-Benz 2701800009 Mercedes-Benz 2701800109 Mercedes-Benz 2701840025 Mercedes-Benz 2701840125 Mercedes-Benz 2701840225 Nissan 15208-92C09 Nissan 15208-92C0N Nissan 15208-HG00D Purolator L18182 Service Champ C8182 Service Champ WP1016 Valvoline VO-164 Warner WP1016 Wix WL7515

Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.

Place a drain pan under the oil filter and unscrew oil filter.

Clean mounting base making sure the O-ring from the old filter is not stuck to the filter mount.

Apply film of clean oil to filter gasket. Do not use grease.

Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.

Check owner’s manual for correct oil specification viscosity and amount.

Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.

Shut off engine and recheck oil level after 5 minutes and top off as necessary.